“Swiss Automatic” Grinder…Made in Jersey
This microgrinding machine uses a hydrostatic bearing akin to the guide bushing on a sliding-headstock, Swiss-type lathe to grind really long, really skinny parts.
Share
The CAM.2 microgrinding machine from Glebar uses a hydrostatic bushing to offer support very near the area of contact between the part and the grinding wheel. There’s pretty much no limit to the length of wire to be ground, as shown in these demonstration parts with tiny ground flats, tapers, threads and so on.
Glebar, a New Jersey manufacturer of OD grinders, plunge grinders and other types of grinders, developed an interesting technology for grinding long, small-diameter parts. We’re talking workpiece stock as small as 0.005 inch in diameter and a minimum grinding diameter of 0.0005 inch for applications such as medical guidewires that can range to 16-feet long.
The way it does that is by applying a concept that’s similar to a sliding-headstock, Swiss-type lathe and its signature guide bushing. Learn more.
Related Content
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
-
How to Determine the Currently Active Work Offset Number
Determining the currently active work offset number is practical when the program zero point is changing between workpieces in a production run.
-
Inside the Premium Machine Shop Making Fasteners
AMPG can’t help but take risks — its management doesn’t know how to run machines. But these risks have enabled it to become a runaway success in its market.