Video: Robot Changes Vise Jaws for Continuous Machining
If a robot can load and unload parts, why can’t it do the same for workholding? Here is video of a robot changing the vise jaws so the same machining center can run different operations in unattended machining.
Share
If a robot can load and unload parts, why can’t it do the same for workholding? VersaBuilt creates robot systems in which the vise jaws that hold a given part inside the machining center also serve as the grippers enabling the robot to load and unload that part. Changing vise jaws as needed enables the robot to shift parts from operation to operation. If there are different jaws on the shelf for different part numbers, then this same jaw change can let the robot switch seamlessly from job to job.
VersaBuilt filmed this video of continuous unattended 3-op machining on a VMC using this system, with the robot switching jaws for the different operations.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
The Future of High Feed Milling in Modern Manufacturing
Achieve higher metal removal rates and enhanced predictability with ISCAR’s advanced high-feed milling tools — optimized for today’s competitive global market.
-
Orthopedic Event Discusses Manufacturing Strategies
At the seminar, representatives from multiple companies discussed strategies for making orthopedic devices accurately and efficiently.