Angle Head Deploys Swivel Module for Indexing
Koma Precision introduces the Index series of angle heads from Alberti, designed with the aim of meeting the need for performing machining operations in several directions.
Share
Koma Precision introduces the Index series of angle heads from Alberti, designed with the aim of meeting the need for performing machining operations in several directions. The series represents a combined system made up of a swiveling module and a standard angle head.
The main characteristic of the system is its ability to rotate and then position the head automatically using the controlled axis of the machine spindle. The technology within the module enables “anchoring” of the head with the machine spindle to achieve an automatic position in the machining direction so that it can then operate like a standard angle head using the spindle rotation.
The system is operated by 6 bar compressed air through the stop pin or by a closed hydraulic circuit controlled by a piston. The entire system can be automatically exchanged by the toolchanger and can mount heads with collet capacity ranging to 10 mm in diameter.
The company says that the system makes possible the use a single head for multiple operations, avoiding additional workpiece setups or tool changes.
Related Content
-
Medical Shop Performs Lights-Out Production in Five-Axes
Moving to five-axis machining enabled this shop to dramatically reduce setup time and increase lights-out capacity, but success relied on the right combination of workholding and automation.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Using Automation to Reduce COGS and Stay Globally Competitive
Decade-long, multiphase automation investments lower operating costs and maintain technology lead in an increasingly competitive global market.