Broaching Tool Enables Single-Operation Serration on a Lathe
PMTS 2019: With Schwanog’s broaching tool, manufacturers of serrated turned parts can use a conventional lathe with C axis and eliminate the cleaning process.
Share
With Schwanog’s broaching tool, manufacturers of serrated turned parts can use a conventional lathe with C axis and eliminate the cleaning process that must usually come between turning and broaching. The broaching tool carries a quarter circle geometry with six teeth. Only the first tooth carries a complete (finish depth) profile, while the remaining five teeth are considered roughing teeth.
Broaching of serration is a two-step process. During the first step, the spindle does not move, and the broach feeds three times until the first tooth is completely established. During the second step, the spindle starts indexing and the five successive teeth are continuously broached until the finished depth is reached.
According to the company, the system saves on costs thanks to reductions in setup and part cycle times.
Related Content
-
Eight Articles to Understand Live Tooling
A roundup of the most read articles about live tooling on 91爆料网.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
-
Using Automation to Reduce COGS and Stay Globally Competitive
Decade-long, multiphase automation investments lower operating costs and maintain technology lead in an increasingly competitive global market.