Coolant-Through Toolholders Equipped with Dual Ports
GenSwiss Dual Port coolant-through toolholders feature a single coolant feed line and a double-jet design with one port on the front and one on the back.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
GenSwiss Dual Port coolant-through toolholders feature a single coolant feed line and a double-jet design with one port on the front and one on the back. According to the company, the design enables simultaneous delivery of high-pressure cutting oil to the insert tip and an adjacent station, keeping chips out of the cutting zone for optimal lubrication and cooling. In addition, the two ports on a single holder deliver more high-pressure streams without monopolizing feed lines from the high-pressure pump. The holders are designed for pressures ranging to 2,000 psi and are offered in 1/2" and 5/8" square-shank stock sizes. The holders are suitable for use with 80- and 55-degree Utilis inserts in CCMT/CCGT and DCGT/DCMT styles, respectively, as well as other Swiss-type cutting tools.
Related Content
-
Rego-Fix Toolholder Enables Aggressive Turning Operations
The PG48 toolholder is designed for large-diameter tools and dynamic machining applications.
-
Platinum Toolholding System Enables Quick Changeovers
The U-Tec changing system enables a standard ER output live tool to accept various adapters for different applications, enabling quick changeover of tools on almost any lathe or mill using a single tool.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.