Dovetail Fixture Enables Five-Sided Machining
Raptor Workholding鈥檚 RWP-030SS dovetail fixture is intended for milling applications on four- and five-axis CNC machines.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Raptor Workholding’s RWP-030SS dovetail fixture is intended for milling applications on four- and five-axis CNC machines. The fixture enables access to all five sides of a workpiece, reducing waste and increasing yield in less time. The 0.75" fixture and its three clamps are manufactured from 17-4 stainless steel.
The devices uses a dovetail spring-loaded clamping system equipped with three clamps. When the clamps are tightened, the workpieces’ dovetail edge is pushed into the radius of the fixture’s solid shoulder, quickly locking it in place for high clamping strength and rigidity without distortion or clamp creep.
The system requires 1/8" of material to hold a workpiece in place. Each workpiece is prepped with a single dovetail, machined in one pass. The system’s three clamps enable it to hold one long workpiece measuring as large as 7.50" × 7.50" × 7.50", or three smaller workpieces.
Related Content
-
Navigating Large-Scale CNC Machining: Suburban Tool’s Niche Strategy to Stay Competitive
Facing increasing competition from lower-cost imports, Suburban Tool made a move toward large-scale, in-house machining. By identifying a niche in large, precision angle plates and tombstones, the company has strengthened its ability to control quality and protect its reputation.
-
Machining Vektek Hydraulic Swing Clamp Bodies Using Royal Products Collet Fixtures
A study in repeatable and flexible workholding by one OEM for another.
-
SMW Autoblok Workholding, Automation Solutions Optimize Milling, Grinding Operations
IMTS 2024: SMW Autoblok presents the WPS XL for milling, measuring and grinding operations with five-axis and large part workpieces, as well as several products from its electronics and automation line.
