Multitasking Turning Center Performs Complex Machining
Hyundai Wia’s L2100SY multitasking wedge-type Y-axis CNC turning center features an 8" chuck on the main spindle and a 6" chuck on the subspindle to support complex machining in a single setup.
Share
Hyundai Wia’s L2100SY multitasking wedge-type Y-axis CNC turning center features an 8" chuck on the main spindle and a 6" chuck on the subspindle to support complex machining in a single setup. The gearless, 20/14.6-hp main spindle is designed for high-precision applications at speeds ranging to 4,500 rpm, with features that ensure minimal thermal growth at high speeds or under heavy cutting loads. The subspindle with C axis is driven by the B-axis ballscrew and servomotor to promote precision and accuracy, with speeds ranging to 6,000 rpm.
The machine provides 24.8" (630 mm) swing over the bed, a maximum turning length of 17.91" (455 mm) and bar capacity of 2.56" (65 mm). The X-and Z-axis travels measure 8.27" (210 mm) and 22.83" (580 mm), respectively, while the Y-axis travel ranges from 3.15" ±1.69" (100 ±50 mm). Cutting is reinforced by an all-axis box guideway design, which provides rigidity and accuracy. A three-step gearbox is ideal for low-torque, heavy cuts as well as high-speed fine finishing.
Related Content
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
-
4 Commonly Misapplied CNC Features
Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.