Positive Inserts Added to Face Milling Cutters Line
Tungaloy has expanded its range of positive inserts for its DoOcto/DoQuad series of face milling cutters with two new types of eight-cornered inserts: the OWMT-ML and OWMT-HJ.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Tungaloy has expanded its range of positive inserts for its DoOcto/DoQuad series of face milling cutters with two new types of eight-cornered inserts: the OWMT-ML and OWMT-HJ. The OWMT-ML insert offers chip control and low cutting force, and is suitable for machining difficult-to-cut materials and workpiece materials with low rigidity such as stainless steel and heat-resistant alloys. The OWMT-HJ insert is suitable for roughing large-sized workpiece materials with wide surfaces and promotes chip evacuation at high feed. The new AH3135 grade with alternately stacked layers is said to provide stable machining and long tool life with chipping and fracture resistance.
Related Content
-
Picking the Right End Mill
Kennametal global product manager Katie Myers explains how cutting tool features can impact machining strategies for different materials.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.